SLD5K

More than enough may be known for some, but for those who want it all, the entire SLD lineup will have you fully covered.
The SLD5K offers all the features of our revered Zero and M – series, but in a sleaker heatsink. The newly revised v2 looks more awesome than ever with red anodized and diamont cut fins. The laster etched logo just set things apart, while the entire red theme just cements our presence further, the Danish colours makes the Sweet Like Danish feel spring in your eyes.

The v1 marked it’s presence, offering awesome power, stability and features, but the v2 just adds more to both the eyes and performance has been further upgraded with an even stronger power supply.

More than 5500 watts of dynamic power supplied by the 8 precision handwound transformers, will never disappoint any sound system and you will be introduced to the term B2Loud.
The high end RCA connectors & the EZ bridge function just makes things better if you intend to run an extra amplifier and get well over 10.000 watts.

Manual

 

SPECIFICATIONSSLD5KSLD5KL - Regulated
Frequency Response:15 Hz ~ 350 Hz15 Hz ~ 350 Hz
Signal to Noise Ratio: >100 dB>100 dB
Input Sensitivity:6 ~ 0.2 V6 ~ 0.2 V
Crossover: 24 dB / Oct24 dB / Oct
Low Pass Crossover: 35 Hz ~ 250 Hz35 Hz ~ 250 Hz
Subsonic Crossover:10 ~ 50 Hz10 ~ 50 Hz
Phase Shift: 0 ~ 180 degrees0 ~ 180 degrees
Bass Boost: 0 ~ 9 dB0 ~ 9 dB
Bass Boost Frequency: 30 Hz ~ 90 Hz30 Hz ~ 90 Hz
Damping Factor:>350>350
Power Terminal gauge:
0 GA x 20 GA x 2
Fuse Rating:500 A250 A (14.4v)
500 A (18v)
Operational voltage:10 V ~ 18 V10 V ~ 18 V
Dimensions:25.59" x 9.84" x 2.28"
65 x 25 x 5.8 cm
25.59" x 9.84" x 2.28"
65 x 25 x 5.8 cm
Power @ 4 Ω 12v:
Power @ 4 Ω 14.4v:
Power @ 4 Ω 16v:
Power @ 4 Ω 18v:
750 w
1250 w
1300 w
1325 w
750 w
750 w
1300 w
1325 w
Power @ 2 Ω 12v:
Power @ 2 Ω 14.4v:
Power @ 2 Ω 16v:
Power @ 2 Ω 18v:
1500 w
2500 w
2600 w
2650 w
1500 w
1500 w
2600 w
2650 w
Power @ 1 Ω 12v:
Power @ 1 Ω 14.4v:
Power @ 1 Ω 16v:
Power @ 1 Ω 18v:
2500 w
5000 w
5200 w
5300 w
2500 w
3000 w
5200 w
5300 w
*In order to get the full power output of the amplifier, it is crucial that your electical system is correctly (over) dimensioned. Failure to upgrading will constrain the power output & lower the efficiency which can cause damage to the amplifier & void the warranty, this also includes ohm loads below of what is written in the manual. Do take your time and read the manual thoroughly before installing

Menu