RAMPAGE, pretty much sums up the first year of the new decade. At the brink of a new year we launch the latest of series of newly engineered low end transducers. Updating the RAMPAGE series with these new 8″, available in both dual 1 Ω & dual 2 Ω, ends the year with the biggest bang!
The basket now inherits the same SAFT** & OCAF** features as the 12″ & 15″, offering supreme airflow and optimized cooling. If in doubt, there’s also plenty of embossed and stamped logos on this design, so you know it is the real deal!
The RAMPAGE8’s predecessor stems all the way back to the beginning of the previous decade. While others have tried to catch up, we decided to start anew. Each part for these woofers have been carefully designed to offer more of what we already had. Yes, even more excursion! The new taller wind coil fits perfectly in well ventilated 300 Oz motor. The combination of coil, basket & new motor has not only lowered the fs, but also increased the overall xmax with 20%. The red nomex spiders & the tall roll surround keeps things under control once the rigid coated paper cone pushes its limits. Adding to the sweetness is the new composite dustcap with the embossed B2 logo.
Have no doubt, the RAMPAGE8 has the authority to reproduce the low frequencies you’d expect from way larger subwoofers.
|Specifications:||RAMPAGE 8D1||RAMPAGE8 D2|
|Frequency Response:||10 Hz ~ 500 Hz||10 Hz ~ 500 Hz|
|Sensitivity:||86.2 dB||83.6 dB|
|Nominal Impedance:||Dual 1 Ω||Dual 2 Ω|
|DC Resistance (RE):||1 Ohm||1.9 Ohm|
|Resonance Frequency (FS):||36 Hz||34.5 Hz|
|Power Handling:||1000 Watts||1000 Watts|
|Peak Dynamic Power Handling:||2000 Watts||2000 Watts|
|VAS:||6.1 L||6.4 L|
|Voice Coil Diameter:||2"||2"|
|CMS:||110 um/N||120 um/N|
|MMS:||160 g||169.1 g|
|Magnet Weight:||300 Oz||300 Oz|
|XMAX one way:||20 mm / 0.787"||20 mm / 0.787"|
|Displacement:||3.3 L / 0.115 cu.ft||3.3 L / 0.115 cu.ft|
*It is essential that our speakers are given time to allow the suspension to soften up. Depending on use, this may take several weeks. While this process is undergoing, it is not recommended to apply full amplification power according to the speakers specs. Once the moving parts have been broken in, the performance of your speaker will increase. **Smooth Air Flow Tech & Optimized Cooling And Flow.