El Cholo
€1.399,00
The El Cholo is the foundation of the Lowrider Series, built as a tribute to American Custom Car Culture. Combining the punch of classic half-bridge designs with efficient full-bridge Class D technology. It delivers powerful, controlled sub-bass with true 24 dB/octave crossovers.
EL CHOLO
The B2 Audio “El Cholo” was born from the streets of the Southwest, shaped through a bond with the lowrider community.
A world where pride runs deep, competition hits hard, and unity holds everything together.
They wanted something that spoke for them — something tough, loud, and full of soul. So we built El Cholo: long, sleek, and low, just like the rides that inspired it.It hits with authority, pushing deep into the tens of kilowatts.
This isn’t just an amplifier — it’s respect, power, and heritage, wired into every beat.
TRIPLE SIMPLE
While most amplifiers up to 7 kW class settle for dual oversized 0 GA inputs, we chose a different path — one defined by excess capability and uncompromised refinement. Power delivery is the lifeblood of any high‑performance amplifier, and limiting it was never an option. Our pursuit of elevated performance led us to the only solution worthy of the design: triple inputs.
By integrating three oversized 0 GA positive inputs on one side and three matching 0 GA ground inputs on the other, the amplifier gains a level of current flow and electrical stability that lesser designs cannot approach. This architecture reduces resistance, enhances voltage integrity, and ensures that even the most demanding systems receive power with effortless composure.
Precision Control Where most full‑bridge amplifiers rely on shallow 6 dB or 12 dB filters, EL CHOLO employs true 24 dB/octave crossovers, eliminating midrange intrusion and preserving pure, authoritative sub‑bass.
Massive Energy Reserves
An oversized dynamic capacitor bank ensures instantaneous impact while maintaining unwavering stability under extreme electrical demand. Gone are the non dynamic full-bridge designs.
Show‑Ready Architecture A long heat‑sink design, triple 0‑gauge power inputs, and full‑range capability make EL CHOLO the ideal centerpiece for elite custom builds and competition‑grade show vehicles.
Backlit Logo The end panel houses the signature “Suave” LED switch, illuminating the B2 emblem in a refined glow with selectable colors to match any build’s aesthetic.
Thermal Intelligence A dynamic multi‑fan cooling system, paired with real‑time voltage, temperature, and clip monitoring via the included remote, ensures consistent performance during extended sessions and long boulevard cruises.
Built for Builders, Not Beginners
EL CHOLO is an elite‑tier amplifier created for those who understand that true performance begins long before the first note plays. It is engineered for seasoned installers, master fabricators, and system designers who approach every build with intention, precision, and pride.
Its power demands are not casual — they are architectural. EL CHOLO requires a properly fortified electrical foundation: high‑output alternators capable of sustaining continuous current delivery, robust lithium or AGM battery banks to stabilize voltage under extreme transients, and wiring practices executed with the discipline of a craftsman. Every connection, every ground point, every cable run matters.
This is not an amplifier that tolerates shortcuts, factory electrical systems, or “good enough” installs. EL CHOLO rewards those who build with purpose — the individuals who blueprint their systems, who understand electrical integrity, who treat their work as a signature.
For these builders, EL CHOLO is more than an amplifier. It is a statement of capability, a reflection of their standards, and a tool worthy of the systems they create. It belongs in vehicles where every detail is intentional and every component earns its place.
.
| Frequency Response: | Signal to Noise Ratio: | Input Sensitivity: | Crossover Slope: | Low Pass Crossover: |
|---|---|---|---|---|
| 10 Hz ~ 20 KHz | >90 dB | 6 V ~ 0.2 V | 24 dB / Oct | 50 Hz ~ 20 KHz |
| Subsonic Crossover: | Phase: | Damping Factor: | Power Terminal gauge: | Fuse Rating: |
| 10 Hz ~ 2 KHz | ~ | >200 | 3 x 0 GA | 1000 A |
| Operational voltage: | Dimensions: | Power @ 4 Ω 14.4v: | Power @ 2 Ω 14.4v: | Power @ 1 Ω 14.4v: |
| 9 V ~ 17 V | 25.19" x 9.65" x 2.48" 640 x 245 x 63 MM | 3500 w / dyno (4000 w / audioprecision) | 7000 w / dyno (8000 w / audioprecision) | 12000 w / dyno (13500 w / audioprecision) |
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
You may also like…
ZERO12
Related products
RAGE 2300.2
RAGE 2300.4
RAGE 3500
RAGE 7800
RAGE4500
Reviews
There are no reviews yet.